heydecco · MicroTop System
A complete, pre-measured microcement system designed for seamless, professional-grade finishes with minimal preparation. Everything you need is included — just mix, tint, and apply. Ideal for sample boards, small projects, and controlled applications where precision matters.
Complete system
Pre-measured
Seamless finish
No demolition
Indoor & outdoor
What's in the kit
Primer Grip
2 lbs
Bond-promoting primer with silica for maximum adhesion
Base Coat
16 lbs
Coarse-grade microtopping — first structural layer
Fine Coat
8 lbs
Fine-grade microtopping — smooth finish layer
Color Toner
2 oz
Pre-measured tint pack — split evenly between Base and Fine
Ultra Seal Matte
32 oz
Protective polyurethane sealer — final protective layer
Tint pack mixing instructions
Divide the 2 oz tint pack evenly:
Important: Shake tint pack thoroughly before opening. Mix completely into each component before application. Do not add extra water or thinners.
Application process
-
1
Clean and prepare the substrate. Apply Primer Grip to promote adhesion. Allow to dry fully.
-
2
Mix 1 oz of tint into Base Coat. Apply first coat with a stainless steel trowel in thin, even passes.
-
3
Allow Base Coat to dry. Lightly sand with 120–180 grit. Remove dust thoroughly.
-
4
Mix 1 oz of tint into Fine Coat. Apply in smooth, thin passes. Sand lightly when dry.
-
5
Apply Ultra Seal Matte in 2 coats for full protection. Allow to cure before use.
Ideal for
For professional use. Always prepare a test area before full application. For technical support contact heydecco or call DF Studio at
347-801-2855.
Downloads
Product Catalog
PDF — full heydecco product range
↓ PDF
Microcement Installation Guidelines
PDF — full application and prep instructions
↓ PDF
