Custom Windows & Doors

DF Studio Inc. • Custom Windows & Doors

Window & Door Resource Center

Custom order policies, installation planning guidance, care instructions, warranty information and customer authorization in one place.

Important custom order information
All proposal pages require customer signature and date. Custom products may be manufactured in Poland. Job-site delivery is excluded unless explicitly quoted, and is priced after the order reaches DF Studio.
Explore Resources
01 / Getting started

Before you place a custom order

Custom windows and doors are made or specially ordered to approved specifications. Please confirm every detail of your proposal before signing and paying a deposit. Your installer should independently verify that the specified units suit your actual openings, site conditions, and applicable project requirements.

Verify specifications

Confirm quantities, finished sizes, rough openings, profile systems, glass, colors, grids, operating configurations, handing, and hardware.

Review project logistics

Confirm lead-time estimates, pickup or delivery needs, unloading arrangements, access restrictions, and installation sequencing.

Know what is included

Installation, local delivery, freight, screens, trim, flashing, and site services are included only when expressly itemized in your proposal.

Approve every page

Customer signature and date are required on every proposal page before DF Studio can release the order for production.

Important: Product images, renderings, catalogs, and samples are illustrative. Your final signed specifications and approved drawings control the custom order, subject to any written amendments agreed before production release.
02 / Important purchase information

Custom order terms & conditions

These terms supplement each signed proposal, order confirmation, and invoice. They do not remove rights or remedies that cannot lawfully be waived.

1. Pricing, sales tax, pickup & delivery

Prices shown on proposals are before applicable sales tax unless expressly stated otherwise. Required sales tax will be calculated on the deposit invoice or applicable payment documents.

Delivery or freight from DF Studio to the customer’s designated location is not included in the quoted product price. If requested, this delivery cost is calculated separately after the windows or doors have arrived at DF Studio based on size, weight, destination, access, loading and transportation requirements. The charge will be submitted for customer approval before delivery is arranged.

Pickup from DF Studio may be arranged subject to scheduling and order status. Unless specifically agreed in writing, the customer is responsible for suitable vehicles, safe load securement, and any required unloading assistance. A delivery service, where offered, may be curbside or another specifically agreed service level; inside placement, stairs, hoisting, and installation are not included without express written confirmation.

2. Final dimensions, drawings & customer approval

The customer must review and approve all order documents, including quantities, overall dimensions, rough opening requirements, handing, inward/outward operation, fixed versus operable panels, opening direction, sash splits, mullions, transoms, sidelights, profiles, frame and sash colors, glazing packages, glass safety specifications, grills/grids, screens, hardware, accessories and any special details.

All job-site dimensions and opening conditions must be verified by the customer or qualified installer before approval. DF Studio is not responsible for measurement or configuration errors furnished or approved by the customer, unless DF Studio expressly accepts measurement/design responsibility in a signed written agreement.

Every page of the final proposal must be signed and dated. Revised specifications require written confirmation; an unsigned verbal discussion does not amend the approved order.

3. Custom manufacturing, final sale & cancellations

Windows, doors, garage doors, insect screens, roller shutters, roller blinds, and other made-to-order or special-order items are produced or sourced for the individual order. After release to manufacturing, changes, cancellations, returns or exchanges require written authorization from DF Studio and may not be possible.

Deposits and custom-order payments are nonrefundable to the extent permitted by applicable law, subject to legally required cancellation rights and remedies for nonconforming, defective or damaged goods. Customer-authorized revisions may result in additional costs and revised production schedules. Non-custom stock items, if offered, are governed by the return terms stated for those items.

4. Deposits, payment & release for production

DF Studio submits an order for manufacturing only after it receives the required signed proposal, customer authorization and successfully processed payment as specified in the invoice. Approved specifications become final upon production release. DF Studio may suspend processing or withhold release of products for outstanding amounts, as permitted by law.

Payment schedules, balances, changes and any separately approved charges are controlled by the specific proposal or invoice. Where a payment dispute arises, customers should contact DF Studio promptly and in writing.

5. Overseas manufacturing & estimated timelines

Custom units may be manufactured overseas, including in Poland. Manufacturing, ocean or air freight, customs, inland transportation, inspection and local delivery dates are estimates unless DF Studio expressly guarantees a date in writing. Delays may result from supply disruptions, manufacturing capacity, transportation, customs, weather, regulatory processing or other circumstances outside DF Studio's reasonable control.

Customers should not schedule installers, demolition, site openings, or dependent trades based solely on an estimated arrival date. To the extent allowed by applicable law, DF Studio is not responsible for consequential expenses caused solely by delays beyond its reasonable control, without limiting any applicable nonwaivable remedies.

6. Receiving, visible damage & concealed issues

Upon pickup or delivery, the customer or designated representative should promptly verify quantities, packaging, glass condition, frames, hardware, labels and visible damage. Note visible damage or shortages on the driver's receipt when possible; photograph the package, shipping label, unit and affected area, and notify DF Studio in writing as soon as reasonably possible. Report concealed damage promptly after discovery and preserve packaging where practical.

Do not install or modify a unit that appears damaged or incorrect until DF Studio has had a reasonable opportunity to review the concern. Late documentation may impair a carrier claim but does not waive rights or remedies provided by law. Damage occurring during customer-arranged transport after lawful transfer is the customer's responsibility to the extent permitted by law.

7. Installation, project conditions & code compliance

Unless separately included in the signed proposal, DF Studio supplies materials only and does not provide field measurement, installation, removal, structural design, flashing, waterproofing, permits, engineering, code review, or site preparation. The customer and their qualified professionals are responsible for proper rough openings, support, fastening, shimming, weather barriers, sealants, safety glass, egress requirements, and compliance with applicable laws and local building requirements.

Improper installation, altered framing, structural movement, inadequate site waterproofing, incorrect measurements, or unauthorized product modifications may cause failures outside DF Studio's control. Manufacturing defects and products supplied contrary to approved specifications remain subject to applicable contractual and legal remedies.

8. Storage, delivery scheduling & additional services

Once the order is received, DF Studio will coordinate availability for pickup or quote requested local delivery. Where delayed collection, redelivery, special handling, storage or customer-requested modifications create additional costs, DF Studio will communicate proposed charges for agreement before imposing them. Any applicable storage or pickup deadlines must be separately disclosed and agreed in writing.

9. Product appearance, site suitability & scope changes

Minor variations in color, sheen, grain, textured finishes, hardware appearance, screen details, or glass reflections can occur due to manufacturing batches, lighting and display settings, within applicable product tolerances. Changes to previously approved units must be requested before manufacturing release and are only effective when accepted in writing.

Special requirements such as coastal exposure, impact resistance, acoustics, thermal performance, security, laminated or tempered glazing, certification, and local code-specific documentation must be communicated before order approval and expressly specified on the order. No performance rating or approval is represented unless supported by applicable product documents.

10. Claims, remedies & applicable rights

For alleged shortage, damage, manufacturing defect or nonconformity, contact DF Studio with the invoice, approved order, photographs and description. DF Studio will coordinate review with the relevant supplier or manufacturer as applicable. The available remedy depends on the facts, applicable manufacturer coverage, the signed sales agreement and controlling law.

No language on this page limits any warranty, consumer protection, cancellation, refund or other rights that cannot legally be excluded. Where these general terms conflict with a controlling written agreement or applicable law, the controlling requirement prevails.

03 / Professional installation

Installation requirements & guidance

Custom windows and doors must be installed by qualified professionals in accordance with the instructions applicable to the actual supplied product, approved project drawings, local building codes, and site-specific weatherproofing requirements. DF Studio supplies materials only unless installation services are expressly included in a written agreement.

Verify site conditions

Before installation, confirm the rough openings, dimensions, structural support, drainage, and compatibility with the selected window or door profile. Report discrepancies before altering or installing the products.

Prepare & waterproof

Provide an appropriate flashing, sill-pan, weather-resistive barrier, and drainage strategy for the construction type and local code requirements. Protect components during construction.

Install, align & seal

Use approved fastening methods, suitable shimming and compatible sealants. Ensure the units are level, square, plumb, and operable without obstructing designated drainage paths.

Final check & handover

Verify locking operation, hinges, glazing, gaskets, weep holes, and perimeter seals. Document any damage or missing parts and provide the customer with the applicable product instructions.

Installation notice: These are general planning guidelines, not installation instructions or approved shop drawings. Fastener placement, rough-opening clearances, anchoring, load requirements and hinge adjustments are product-specific. Contact DF Studio for available documentation for your exact order. Do not rely on instructions for a different manufacturer or system.
04 / Ownership & upkeep

Care & maintenance

General care guidance for European-style uPVC tilt-and-turn windows and compatible doors. Product-specific manufacturer guidance takes priority when it differs.

Cleaning glass & uPVC frames
  • Clean glass using a suitable non-abrasive glass cleaner and soft cloth or sponge; dry with microfiber to reduce streaks.
  • Wash uPVC frames with mild soap and water using a soft cloth.
  • Avoid abrasive pads, sharp tools, solvents, acidic or aggressive cleaners, and harsh chemicals, including ammonia-based cleaners where prohibited by glass or finish instructions.
  • As a general guideline, clean frames and glass every 2–3 months; increase frequency in coastal, industrial and high-pollution areas.
  • Inward-opening tilt-and-turn sashes can facilitate cleaning from inside, but use safe access practices and do not lean outside the opening.
Moving parts, locking hardware & lubrication
  • Inspect hinges, locking points, tilt arms and handle mechanisms approximately every 6–12 months, or according to the hardware manufacturer's instructions.
  • For hardware that specifies lubrication, use only the approved silicone-based product or grease, apply sparingly, and remove excess.
  • Do not universally lubricate every hinge: certain maintenance-free assemblies specifically prohibit oil or lubrication. Consult the exact hardware instructions before applying any product.
  • Operate handles through their full intended positions; never force a jammed handle or sash.
  • Arrange professional adjustment if the sash drags, fails to seal, or does not engage its locking points smoothly.
Gaskets, weather seals & drainage
  • Inspect seals and gaskets at least twice yearly for damage, compression, displacement or cracking.
  • Wipe gaskets with mild soap and water. Use only manufacturer-approved rubber conditioning products.
  • Inspect drainage channels and weep openings every 3–6 months. Clear debris gently with a soft brush; avoid damaging the drainage system.
  • Never seal, tape, paint, or otherwise block drainage openings.
  • Check for water intrusion, drafts, unusual noise, or recurring condensation and seek qualified assistance if issues persist.
Seasonal care & troubleshooting
  • Spring/summer: Remove pollen and debris, check seals and hardware after winter, and inspect for storm or water damage.
  • Fall/winter: Clean drain openings, check gasket seating, ensure full closure and confirm hardware operates smoothly.
  • Stiff handle: Confirm the sash is fully seated before gently reattempting operation; do not force it.
  • Tilt mode not engaging: Return the sash carefully to its closed position and verify correct handle operation. Consult the system manual if unresolved.
  • Drafts/rattling: Inspect seals and alignment; arrange professional adjustments rather than overtightening hardware without training.
  • Loose handle: A qualified person can inspect or tighten its mounting screws following the actual handle design.
Safety & everyday operation
  • Do not slam windows or doors, hang weight from open sashes, lean on them, or obstruct their travel with furniture.
  • Close and lock windows in the correct position to engage weather seals.
  • Use appropriate child-safety devices and restrictors where needed, and supervise children around open windows.
  • Secure openings during severe weather and when unattended.
  • Refer glass replacement, major hinge adjustments and hardware repairs to qualified professionals.
Maintenance intervals are guidance, not a universal warranty condition. Local exposure, use, and the specific manufacturer’s instructions may require different service.
05 / Coverage & claims

Warranty & product support

Warranty clarification: DF Studio does not automatically provide a “limited lifetime warranty” on all custom windows and doors. Any applicable product warranty must be confirmed for the specific manufacturer, profile system, glazing and hardware in the order documentation. Any warranty coverage must be supported by the written terms applicable to the product delivered under the customer’s order.

What may be eligible for review

  • Manufacturing or fabrication defects, such as improperly made components or misaligned factory assemblies.
  • Defective materials, seals, profiles or hardware under the product-specific warranty.
  • Damaged or broken glass found on receipt, subject to prompt receiving inspection and applicable legal rights.
  • Products supplied in material disagreement with the signed approved order.

Common exclusions in manufacturer warranties

  • Improper installation, unsupported openings, improper flashing or failure to follow the applicable installation manual.
  • Impact, misuse, accidental damage, vandalism or forced entry.
  • Floods, fires, severe storms, earthquakes or other external events, subject to the actual warranty.
  • Normal wear, expected weathering, or changes in appearance outside applicable manufacturing tolerances.
  • Improper cleaners, inadequate maintenance, or failure to protect drainage systems.
  • Unauthorized drilling, painting, alterations, repairs, or use of incompatible third-party parts.
  • Removal, reinstalling, access equipment, contractor labor or related expenses unless expressly covered or required by applicable law.

How to submit a support or warranty claim

  1. Provide your DF Studio order number or invoice and purchase date.
  2. Describe the concern and when it was first observed.
  3. Attach clear photographs of the full unit, affected area, hardware/product identifiers, and packaging if shipping damage is involved.
  4. Tell us whether the product has been installed, modified or serviced, and by whom.
  5. DF Studio will review the documentation and coordinate next steps with the responsible manufacturer or supplier as appropriate. Do not remove or alter the suspected defective component without first documenting it, unless necessary for safety.

Coverage durations, whether coverage transfers, and who pays for parts, freight and labor vary by product and warrantor. The applicable written warranty and law determine the outcome. There is no blanket statement of lifetime coverage on this page.

06 / Quick answers

Frequently asked questions

Are local delivery charges included in my window quote?
No, unless your written proposal expressly includes them. Requested local freight/delivery is quoted separately after the units arrive at DF Studio, then submitted for your approval before scheduling.
When does my custom order enter production?
After DF Studio receives your signed and dated approval on every proposal page and the required payment has cleared, subject to order confirmation and production release.
Can I cancel or change a custom order?
Changes are often impossible after production release. Any cancellation or amendment must be requested in writing and is subject to DF Studio's written approval, manufacturer feasibility, applicable charges and any legally protected rights.
Who is responsible for measuring the openings?
The customer or their qualified installer, unless DF Studio expressly agrees in writing to provide and accept responsibility for field measuring.
Does DF Studio install the windows and doors?
DF Studio supplies materials only unless installation services are expressly listed in your signed proposal. Project installation and code compliance belong to your qualified installer/design professionals.
Are factory lead times guaranteed?
No. Overseas manufacturing, shipping and customs dates are estimates unless a specific date is guaranteed in writing.
What should I do if a shipment is damaged?
Document the issue immediately with clear photos, note visible damage on the delivery receipt where possible, preserve packaging, and email DF Studio before installing the affected product. Report concealed damage as soon as you find it.
Does every window include a lifetime warranty?
No. Warranty coverage varies by manufacturer and component. Request the applicable written warranty for your exact ordered products before purchasing.
How frequently should tilt-and-turn windows be maintained?
For general guidance, wash frames and glass every 2–3 months, inspect drainage every 3–6 months, and inspect hardware/seals seasonally. Follow the actual manufacturer's instructions for lubrication and adjustments.
07 / Customer sign-off

Custom window & door authorization

Please review all specifications and terms carefully before signing your proposal.

By signing the order proposal, the customer acknowledges that they have:

  1. Reviewed and approved every page of the proposal, including measurements, quantities, profiles, glass, color, configuration, handing, opening direction, hardware, drawings and accessories.
  2. Verified job-site dimensions and the suitability of the proposed products, either personally or with a qualified installer, unless separate written measuring responsibilities have been agreed.
  3. Understood that custom or special-order products may be manufactured or sourced overseas, including Poland, and that changes/cancellations after production release are restricted.
  4. Understood the deposit and payment terms, including the nonrefundable nature of custom-order payments to the extent permitted by law.
  5. Understood that manufacturing, arrival and delivery schedules are estimates, not guaranteed completion dates unless stated in writing.
  6. Understood that the product quote excludes local delivery/freight to the customer's destination, unless specifically included in writing, and that any requested charge is calculated and approved separately after arrival at DF Studio.
  7. Understood that installation, flashing, waterproofing, permits and field measuring are excluded unless expressly stated in the order.
  8. Read the applicable warranty and inspection guidance and understand how to raise a claim for defective, damaged or nonconforming products.
  9. Authorized DF Studio Inc. to proceed with manufacturing/fulfillment according to the signed proposal and payment agreement.

Customer confirmation: “I confirm that I have checked this quotation against my required specifications and approve the order as presented.”

Customer name / company
Customer signature
Order / proposal number
Date

This website section is informational; signing an online page does not replace the signed and dated proposal. Customer initials/signature are required on every proposal page.

08 / We're here to help

Questions before ordering?

Contact our team to confirm specifications, request applicable manufacturer documents, discuss delivery, or submit a post-delivery concern.

DF Studio Inc.
243 Grandview Ave
Staten Island, NY 10303
(347) 801-2855
michael@dfstudio.nyc  |  sales@dfstudio.nyc