1. Home
  2. Clip&Rip Universal Hidden Deck Clip

Clip&Rip Universal Hidden Deck Clip

Contact us for availability!

Zoom image

Clip&Rip Universal Hidden Deck Clip

Contact us for availability!

Style:

APPLICATION

Clip&Rip™ Universal Hidden Deck Clip provides faster installation over traditional hidden clips. The 16 pre-assembled collated strips with stainless steel screws allow for one-pass fastening in one go saving time and money on the job site.

FEATURES

  • One-Pass Fastening: fastener can be installed in one go. The clip will remain level for sliding the next board in place
  • Compression Tabs: “bite” down into the joists, keeps clip level after screw is completely installed
  • Ease-of-Use: no additional tools needed. Installation is as easy as Insert, Drive, Snap!
  • Universal Compatibility: suitable for grooved composite, PVC, and hardwood decking
  • Time & Costs Savings: 16-clips per strip allow for installation of a full 20ft board
  • Consistent & Clean Look: clip creates 3/16″ spacing between boards
  • Corrosion Resistance: 305 and 316 stainless steel options available. 316 stainless allows for us in marine environments. Suitable for ACQ and pressure-treated lumber.
  • Packaging Options: available in 192ct packs covering 100 sq ft and 800ct packs for 425 sq ft

 

INSTRUCTIONS

  • Insert the strips of clips with the  arrow pointing forward into the leading board groove. Center over joist.
  • Drive the screws down in a straight and steady fashion until the head of the screw is flush with the clip.
  • Lift up on strip to break off installed clip.
  • Install clips at every joist along length of board.
  • Place next board into position. Holding the deck board at a slight angle, push deck board into previously installed clips.
    Check between boards to ensure consistency.

  • STEP 1: INSERT

  • STEP 2: DRIVE

  • STEP 3: SNAP

    • STEP 4: SLIDE BOARD & REPEAT

    ESTIMATED COVERAGE

    • JOIST SPACING 100 Sq Ft. (area) 200 Sq Ft. (area) 300 Sq Ft. (area) 400 Sq Ft. (area) 500 Sq Ft. (area)
      12″ 210 441 672 882 1113
      16″ 175 336 512 672 848

     SYSTEM PACKAGING 

    LENGTH UPC ITEM NO FINISH DRIVE TYPE CLIPS PER STRIP PACK QTY
    1-3/4″ 099385172358 KAS38T175 305 Stainless with Nylon Clip T-15 16 192 (12 strips)
    1-3/4″ 099385172372 KAU38T175 316 Stainless with Nylon Clip T-15 16 192 (12 strips)

     

    LENGTH UPC ITEM NO FINISH DRIVE TYPE CLIPS PER STRIP PACK QTY
    1-3/4″ 099385172365 KAS38B175 305 Stainless with Nylon Clip T-15 16 800 (50 strips)
    1-3/4″ 099385172389 KAU38B175 316 Stainless with Nylon Clip T-15 16 800 (50 strips)

     

    STARTER CLIP INSTRUCTIONS

    • For first and last boards, screw a starter clip at every joist.
    • Once all starter clips are installed, push the first deck board into starter clips.
    • Proceed to fasten remainder of boards with standard clip

Related products