Clip&Rip Universal Hidden Deck Clip

APPLICATION

Clip&Rip™ Universal Hidden Deck Clip provides faster installation over traditional hidden clips. The 16 pre-assembled collated strips with stainless steel screws allow for one-pass fastening in one go saving time and money on the job site.

FEATURES

• One-Pass Fastening: fastener can be installed in one go. The clip will remain level for sliding the next board in place
• Compression Tabs: “bite” down into the joists, keeps clip level after screw is completely installed
• Ease-of-Use: no additional tools needed. Installation is as easy as Insert, Drive, Snap!
• Universal Compatibility: suitable for grooved composite, PVC, and hardwood decking
• Time & Costs Savings: 16-clips per strip allow for installation of a full 20ft board
• Consistent & Clean Look: clip creates 3/16″ spacing between boards
• Corrosion Resistance: 305 and 316 stainless steel options available. 316 stainless allows for us in marine environments. Suitable for ACQ and pressure-treated lumber.
• Packaging Options: available in 192ct packs covering 100 sq ft and 800ct packs for 425 sq ft

INSTRUCTIONS

• Insert the strips of clips with the  arrow pointing forward into the leading board groove. Center over joist.
• Drive the screws down in a straight and steady fashion until the head of the screw is flush with the clip.
• Lift up on strip to break off installed clip.
• Install clips at every joist along length of board.
• Place next board into position. Holding the deck board at a slight angle, push deck board into previously installed clips.
  Check between boards to ensure consistency.