1. Home
  2. SEMCO
  3. Nu-Lift Cleaner

Nu-Lift Cleaner

  • $46.60
Zoom image

Nu-Lift Cleaner

  • $46.60
Size:

Nu-Lift Cleaner is a formulated with an environmentally-responsible mineral acid that is user friendly. Nu-Lift Cleaner does exactly what its name implies: it lifts out and removes dirt, alkalinity, efflorescence, hard water deposits, magnesium, and stains from surfaces like grout and natural stone without harming or discoloring.

  • Removes organic deposits
  • Balances low pH
  • Safely dissolves: efflorescence, magnesium, lime deposits, soap scum
  • 100% Biodegradable
  • Can be safely used in confined areas

Prep B

1)

Prepare your space and Gather your materials

Ensure your surface is free of any debris. Gather all the products and tools needed for your project.

2)

WASHING PROCESS

• Mix 1 part Stone Soap with 4 parts of water
• Mix 1 part POWER CLEANER with 4 parts of water
• Slightly dampen the surface with water. This will prevent cleaners to penetrate deep into the pores of the substrate
• Apply the POWER CLEANER mixture lightly with a pump sprayer and allow to sit for 2-3 minutes
• Scrub the surface using a scrub machine or nylon brush
• Rinse the surface off well and ensure no residue is left
• Repeat all steps in this task with Stone Soap to clean chemical residue

3)

Additional Information

• Always let surface completely dry prior to application of sealers
• Do not use Muriatic Acid to prep surfaces as residue may lead to adhesion problems

Prep C

1)

Prepare your space and Gather your materials

Ensure your surface is free of any debris. Gather all the products and tools needed for your project.

2)

WASHING PROCESS

• Mix 1 part POWER CLEANER with 4 parts of water for POWER CLEANER SOLUTION 1
• Mix 1 part POWER CLEANER with 9 parts of water for POWER CLEANER SOLUTION 2
• Mix 1 part Nu-Lift CLEANER with 1 part of water
• Slightly dampen the surface with water. This will prevent cleaners to penetrate deep into the pores of the substrate
• Apply the POWER CLEANER SOLUTION 1 mixture lightly with a pump sprayer and allow to sit for 2-3 minutes
• Scrub the surface using a scrub machine or nylon brush
• Rinse the surface off well and ensure no residue is left
• Apply Nu-Lift Cleaner solution and repeat all steps.
• Apply POWER CLEANER SOLUTION 2 and repeat steps for the procedure

3)

Additional Information

• Always let surface completely dry prior to application of sealers
• Do not use Muriatic Acid to prep surfaces as residue may lead to adhesion problems

Prep D

1)

Prepare your space and Gather your materials

Ensure your surface is free of any debris. Gather all the products and tools needed for your

2)

WASHING PROCESS

• Slightly wet surface with water prior to applying Nu-Lift Cleaner
• Apply undiluted Nu-Lift Cleaner on to the surface. and allow to sit for 2-3 minutes
• Scrub the surface using a scrub machine or nylon brush
• Rinse the surface off well and ensure no residue is left
• Mix 1 part Stone Soap with 4 parts of water and allow to sit for 2-3 minutes
• Scrub the surface using a scrub machine or nylon brush
• Rinse the surface off well and ensure no residue is left

3)

Additional Information

• Always let surface completely dry prior to application of sealers
• Do not use Muriatic Acid to prep surfaces as residue may lead to adhesion problems

Product Data Sheet

Related products