Henry — Waterproofing Membrane
Blueskin® WP 200 Self-Adhered Waterproofing Membrane
A self-adhered SBS rubberized asphalt membrane laminated to a blue high-density polyethylene film for high-performance waterproofing.
Blueskin® WP 200 fully adheres to prepared substrates, helping prevent lateral water movement between the membrane and waterproofed surface.
Key Benefits
Waterproofing
Fully adhered barrier
Helps stop water migration behind the membrane.
Application
No flame required
Self-adhered system installs without torching or special heat equipment.
Performance
Flexible SBS membrane
Designed to remain flexible, including in lower temperature conditions.
Consistency
Factory controlled thickness
Provides consistent 60 mil membrane thickness across the roll.
Best Applications
Below-Grade Waterproofing
Concrete & Masonry Substrates
Post-Applied Construction
Product Specifications
| Property |
Details |
| Membrane Type |
Self-adhered SBS rubberized asphalt membrane |
| Top Film |
Blue high-density polyethylene film |
| Thickness |
60 mils (1.5 mm) |
| Roll Width |
36" |
| Roll Length |
66.7 ft |
| Gross Coverage |
200 sq. ft. |
| Net Coverage |
186 sq. ft. based on 65 mm side and end laps |
Application Notes
| Step |
Process |
| 1 |
Prepare substrate so it is clean, dry, and ready for membrane adhesion |
| 2 |
Position membrane and remove release film as installation progresses |
| 3 |
Press membrane firmly to achieve full contact with the substrate |
| 4 |
Overlap side and end laps as required for watertight performance |
For best results, follow Henry’s official installation instructions and project-specific waterproofing details before installation.
