1. Home
  2. SEMCO
  3. Power Cleaner

Power Cleaner

  • $53.70
Zoom image

Power Cleaner

  • $53.70
Size:

Power Cleaner is a highly concentrated, commercial strength cleaner, degreaser, and wax remover for commercial and industrial use. Power Cleaner has been formulated with a distinct blend of water softening agents and nonionic surfactants that allow you to clean and dissolve the toughest grease /oil stains from almost any surface, including concrete. Power Cleaner works by penetrating, suspending, emulsifying, and dissolving surface contaminants. This remarkable product is so versatile it can be used to clean everything from degreasing the dirtiest substrate to removing oil stains and/or wax from commercial and industrial surfaces.

  • Proficient industrial wax remover
  • Removes most water based acrylic sealers
  • Effectively degreases commercial kitchens
  • Removes tar, tire marks, and gum from most surfaces
  • 100% Biodegradable
  • Can be safely used in confined areas

Prep B

1)

Prepare your space and Gather your materials

Ensure your surface is free of any debris. Gather all the products and tools needed for your project.

2)

WASHING PROCESS

• Mix 1 part Stone Soap with 4 parts of water
• Mix 1 part POWER CLEANER with 4 parts of water
• Slightly dampen the surface with water. This will prevent cleaners to penetrate deep into the pores of the substrate
• Apply the POWER CLEANER mixture lightly with a pump sprayer and allow to sit for 2-3 minutes
• Scrub the surface using a scrub machine or nylon brush
• Rinse the surface off well and ensure no residue is left
• Repeat all steps in this task with Stone Soap to clean chemical residue

3)

Additional Information

• Always let surface completely dry prior to application of sealers
• Do not use Muriatic Acid to prep surfaces as residue may lead to adhesion problems

 Prep C

1)

Prepare your space and Gather your materials

Ensure your surface is free of any debris. Gather all the products and tools needed for your project.

2)

WASHING PROCESS

• Mix 1 part POWER CLEANER with 4 parts of water for POWER CLEANER SOLUTION 1
• Mix 1 part POWER CLEANER with 9 parts of water for POWER CLEANER SOLUTION 2
• Mix 1 part Nu-Lift CLEANER with 1 part of water
• Slightly dampen the surface with water. This will prevent cleaners to penetrate deep into the pores of the substrate
• Apply the POWER CLEANER SOLUTION 1 mixture lightly with a pump sprayer and allow to sit for 2-3 minutes
• Scrub the surface using a scrub machine or nylon brush
• Rinse the surface off well and ensure no residue is left
• Apply Nu-Lift Cleaner solution and repeat all steps.
• Apply POWER CLEANER SOLUTION 2 and repeat steps for the procedure

3)

Additional Information

• Always let surface completely dry prior to application of sealers
• Do not use Muriatic Acid to prep surfaces as residue may lead to adhesion problems

 

Product Data Sheet

Related products