My shopping cart
Your cart is currently empty.
Continue ShoppingFortico 2C
- $209.99
Fortico 2C
- $209.99
Fortico 2C
2 component, PU waterborne finish for parquet floors subject to heavy traffic. Fortico 2C is extremely scratchresistant and does not burnish. Fortico 2C can be easily applied without overlapping or roller imprints. FORTICO 2C has been specifically developed for heavy traffic parquet floors, such as commercial spaces, hotels, restaurants, etc.
» Extremely scratch resistant thanks to anti-scratch technology.
» High wear resistance.
» Doesn't burnish.
TECHNICAL DATA
| CASE | 4 x 5 L 4 x 500 ml |
|---|---|
| CLEANING | Water |
| COVERAGE | 100-125 sq.ft./L per coat |
| DISPOSAL | Dispose of residue and empty packaging in accordance with local ordinances |
| DRYING TIMES |
Dust dry: after 20 to 30 minutes Sandable: after 4 to 6 hours Lightly walkable: after 24 hours Fully cured: After +/- 7 days |
| GLOSS LEVEL |
Matte 15-25 Satin 45-50 Natural >10 |
| MIXING RATIO | 100/10 |
| POTLIFE | +/- 3 hours after adding the hardener |
| PRODUCT TYPE | waterbone |
| SANDING GRIT | P 120-150 |
| SHELF LIFE | 12 months in the original and unopened packaging |
| SOLID CONTENT | +/- 32% |
| STORAGE/TRANSPORT | between 5°C and 25°C |
| VISCOSITY |
+/- 20 sec - DIN 4mm |
PREPARATION
Make sure that all old finish coats are completely removed and that the wood is free from dust and other dirt. Can be used on sanded, planed, and brushed wood. For a lighter and more natural finish, WOODLOOK PLUS can be used as a primer first.
APPLICATION
FORTICO 2C can be used as primer and finishing coat. Mix the waterborne finish with the hardener at 10 to 1 (10%). Let the product settle for 15 minutes. Apply the product in 3 layers with a brush or roller. First layer: apply ca. 7.50 - 9.50 g/sq.ft and let dry for +/- 4 hours.
Second layer: apply ca. 7.50 - 9.50 g/sq.ft in the same manner as the first layer and let dry for +/- 6 hours. Afterwards intermediate sanding with grain 180-220, make it dust-free and apply the third layer at ca. 7.50 - 9.50 g/sq.ft
MATERIAL USE
FINISHING
FORTICO can be used as a primer and finishing coat.
MAINTENANCE
Regular maintenance with Ciranova® Hard Floor Fresh. For periodic maintenance, use UNICARE X-MATT for natural & matt finish and Hard Floor Polish for the satin finish. Ciranova® Hard Floor Cleaner is used for cleaning highly soiled floors and to remove old layers of polish.