Apply one coat of DECCO Primer Grip with a roller.
Ensure even coverage to create a proper profile on the support surface.
02 / Drying Time
Allow 1 to 2 hours for the product to dry completely.
Application Video
• Drying time may vary depending on temperature, humidity, and substrate condition.
⸻
03 / Tool Cleaning
• Immediately clean the roller with plenty of clean water after use.
• Proper cleaning extends the life of the tool and prevents contamination.
Ready-to-Use Synthetic Resin Primer with Bond-Promoting Silica Aggregates
Description:
Decco Primer Grip is a ready-to-use, low-VOC, synthetic resin-based primer formulated with suspended silica aggregates. It is designed to improve the adhesion and long-term performance of mortars, toppings, and leveling compounds when applied to existing ceramics and other difficult-to-bond substrates. The product is supplied as a white latex and can be easily applied using a roller or brush.
⸻
Pre-Application Requirements
• Do not dilute: Use Decco Primer Grip undiluted for best results.
• Surface preparation:
• Substrate must be clean, sound, and free of all contaminants, including dust, dirt, grease, curing compounds, or sealers.
• Any loose material must be removed prior to application.
• A rough finish on the substrate is recommended. Smooth troweled surfaces may require acid etching or mechanical abrasion.
• Note: Acid etching is ineffective for removing most sealers. A hot solvent may be necessary, but always confirm the type of sealer used and follow the manufacturer’s removal recommendations.
• For best overall performance, a blast-track removal system is the most effective way to remove surface contaminants.
• Moisture and temperature conditions:
• Once cleaning is complete, dampen the surface with clean water before applying the primer.
• Application surface and ambient temperature must be above 40°F (4°C).