heydecco — MicroTop Floor System
MicroTop Ready-to-Use Floor Kit
A complete, pre-measured microcement system for seamless floor applications — base coat, fine coat, toner, and 2-component sealer, all included.
MicroTop Floor RTU applies directly over smooth non-absorbent surfaces like tile, porcelain, and marble — with no demolition required. The kit includes both a Base Coat (for covering joints) and a Fine Coat (for the finished surface), giving you a complete 2-layer floor system in one box.
Floor kit vs. Wall kit — what's different?
Floors require an extra Base Coat layer to cover tile joints and level the substrate before the fine finish coat. The wall kit skips this step since walls are typically smooth and joint-free.
Key Benefits
Complete floor system
Includes Base Coat to cover joints plus Fine Coat for the finished surface — everything in one kit.
No demolition required
Applies directly over existing tile, porcelain, marble, and concrete. Just 1–3mm thick.
40 colors · 4 intensities
Full Classic and Nature collections. Use 100%, 75%, 50%, or 25% of toner to control color depth.
Pre-measured system
All components included and calibrated — primer, base coat, fine coat, toner, and Ultra Seal sealer.
What's in the Kit
decco Primer Grip
Ready to use
Roll on 1 coat to create profile on the support. Allow 1–2 hours to dry completely. Clean roller immediately with water.
MicroTop Base Coat
Ready to use — for floors only
Mix contents with spatula or mechanical mixer. Apply 2 coats with Black Series stainless steel trowel to cover tile joints. Sand with 80–120 grit between coats.
MicroTop Fine Coat
Ready to use — Fine grade
Add toner and mix mechanically. Apply 2 coats with steel trowel in thin passes. Sand with 220 grit after 1st coat, 320 grit after 2nd coat.
WB Color Toner
Pre-measured · UV stable · Integral color
Shake before use. Add to Fine Coat only — split 1 oz Base, 1 oz Fine (or use full pack in Fine for wall kit). Mix mechanically until uniform.
Ultra Seal Matte
2-component PU sealer
Mix Part A + B at 10:1 ratio. Pot life 30–40 min once mixed. Apply 2 coats with roller, 4–6 hrs between coats. 7 days before wetting.
Color Toner Mixing
For the floor kit — split the toner pack between Base and Fine:
Add 1 oz to Base Coat 1 oz
Add 1 oz to Fine Coat 1 oz
Use less toner for lighter intensity (see Color Intensity Guide in downloads) Optional
Applications
Over existing tile & porcelain
Application Process
| Step |
Process |
| 1 |
Clean surface, leaving it free of dust and grease. Place adhesive tape to delimit the area. |
| 2 |
Roll on decco Primer Grip. Allow 1–2 hours to dry completely. Clean roller immediately with water. |
| 3 |
Mix Base Coat with spatula or mechanical mixer. Apply 1st coat with Black Series trowel to cover tile joints. |
| 4 |
Let dry. Sand with 80–120 grit. Clean and vacuum thoroughly. Apply 2nd coat of Base Coat over entire surface. |
| 5 |
Sand with 80–120 grit again. Clean and vacuum thoroughly. |
| 6 |
Add toner (1 oz) to Fine Coat. Mix mechanically until homogeneous. Apply 1st coat with steel trowel in thin passes. |
| 7 |
Let dry. Sand with 220 grit. Clean and vacuum thoroughly. |
| 8 |
Apply 2nd coat of Fine Coat. Two coats mandatory for a solid, uniform finish. |
| 9 |
Let dry. Sand with 320 grit. Clean and vacuum thoroughly. |
| 10 |
Wait 4–6 hrs. Mix Ultra Seal A+B at 10:1 (pot life 30–40 min). Apply 2 coats with roller, 4–6 hrs between each. |
| 11 |
Allow 7 days before wetting or cleaning the sealed surface. |
Technical Data
| Property |
Details |
| Product type |
Ready-to-use microcement — Base + Fine grade |
| Coverage (Base Coat) |
0.1 lb/sq ft per coat |
| Coverage (Fine Coat) |
0.05 lb/sq ft per coat |
| Coverage (Ultra Seal) |
0.01 lb/sq ft per coat |
| Base Coat sanding |
80–120 grit (after each coat) |
| Fine Coat sanding — 1st coat |
220 grit sandpaper |
| Fine Coat sanding — 2nd coat |
320 grit sandpaper |
| Ultra Seal mix ratio |
10:1 (Part A : Part B) |
| Ultra Seal pot life |
30–40 minutes after mixing |
| Dry between sealer coats |
4–6 hours |
| Full cure before wetting |
7 days |
| Compatible substrates |
Tile, porcelain, marble, concrete, stone |
| Available colors |
40 colors · 4 intensities each |
Downloads
Technical Data Sheet — Microcement in Floors
PDF — surface prep, application steps, coverage data
Color Chart 2026 — 40 Colors
PDF — Classic & Nature collections with color intensity guide
Product Catalog
PDF — full heydecco product range & system overview
Always complete the system with 2 coats of Ultra Seal Matte — this protects the microcement and ensures long-term durability. Wait 7 full days before exposing the surface to water or cleaning products. Use a decco Black Series stainless steel trowel for best results on the Base Coat layer.
